Network - Revision history

Nicoduck: NO STP

2018-08-31T15:55:00Z

NO STP

← Older revision		Revision as of 15:55, 31 August 2018
Line 18:		Line 18:
	* Cabling from your tent to the Datenklo must not cross any road, trackway or fire lanes (this is to electrically protect our network hardware, as well as to reduce trip hazards and vehicle snags).		* Cabling from your tent to the Datenklo must not cross any road, trackway or fire lanes (this is to electrically protect our network hardware, as well as to reduce trip hazards and vehicle snags).
	* If you are connecting a Nanode / Arduino Ethernet / other microcontroller to the network please make sure it is using a unique MAC address. Many of the code examples for such devices use an identical MAC address and this will cause problems - if you aren't sure contact us.		* If you are connecting a Nanode / Arduino Ethernet / other microcontroller to the network please make sure it is using a unique MAC address. Many of the code examples for such devices use an identical MAC address and this will cause problems - if you aren't sure contact us.
	* If you are connecting a switch, you need to contact the NOC if you are connecting more than 10 stations. You are only allowed one uplink from your switch to our network - do not attempt to connect multiple cables or to multiple DKs!		* If you are connecting a switch, you need to contact the NOC if you are connecting more than 10 stations. You are only allowed one uplink from your switch to our network - do not attempt to connect multiple cables or to multiple DKs! Disable STP on your equipment!

	If you break these rules, we will track you down or triangulate you, but we'd rather spend the time maintaining the smooth operation of the network, so please don't waste our time. And if you think [[Team:NOC]] cannot locate you just because you're wireless - think again. ;-)		If you break these rules, we will track you down or triangulate you, but we'd rather spend the time maintaining the smooth operation of the network, so please don't waste our time. And if you think [[Team:NOC]] cannot locate you just because you're wireless - think again. ;-)
Line 208:		Line 208:

	Yes, but for stability purposes all edge ports are limited to 10 MAC addresses at a time. If you want to connect a switch with more stations, you need to stop by [[Team:InfoDesk]] and ask us to raise the port-security on your port. If you do this, you need to convince us that you know what you're doing and promise not to do anything that may harm the network - in particular, you must not connect the switch to our network by more than 1 cable (not even to a different DK).		Yes, but for stability purposes all edge ports are limited to 10 MAC addresses at a time. If you want to connect a switch with more stations, you need to stop by [[Team:InfoDesk]] and ask us to raise the port-security on your port. If you do this, you need to convince us that you know what you're doing and promise not to do anything that may harm the network - in particular, you must not connect the switch to our network by more than 1 cable (not even to a different DK).
			Make sure that you disable STP and other protocols on your switch which try to be intelligent.

	=== My port goes up and down every couple of minutes ===		=== My port goes up and down every couple of minutes ===

AK47 at 08:43, 25 August 2018

2018-08-25T08:43:56Z

← Older revision		Revision as of 08:43, 25 August 2018
Line 81:		Line 81:
	Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-legacy18 SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:		Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-legacy18 SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:

	~~<!--~~* internetofstuff/internetofstuff (~~for the "Internet of Stuff" VLAN;~~ for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)~~!-->~~		* internetofstuff/internetofstuff (for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)
	* emf/emf or emfcamp/emfcamp or guest/guest (for regular user VLAN)		* emf/emf or emfcamp/emfcamp or guest/guest (for regular user VLAN)
	* outboundonly/outboundonly (Experimental. Allows only outbound traffic; giving users basic protection and a way to save battery usage)		* outboundonly/outboundonly (Experimental. Allows only outbound traffic; giving users basic protection and a way to save battery usage)

	Please note the username AND password are case-sensitive.		Please note the username AND password are case-sensitive.
	~~<!--~~
	Projects that do not support WPA2 802.1X should use the emfcamp-insecure18 SSID. Based off the MAC address vendor, projects will ~~dropped into~~ the ~~"Internet of Stuff"-VLAN automatically~~. If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):		Projects that do not support WPA2 802.1X should use the emfcamp-insecure18 SSID. Based off the MAC address vendor, projects will be firewalled automatically. They will not be reachable from the internet, but only from the camp network. This does offer outbound internet connectivity, not inbound. This If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):

	* Texas Instruments		* Texas Instruments
	* Espressif Inc.~~!-->~~		* Espressif Inc.

	== Camping area and workshops ==		== Camping area and workshops ==

AK47 at 18:45, 23 August 2018

2018-08-23T18:45:08Z

← Older revision		Revision as of 18:45, 23 August 2018
Line 81:		Line 81:
	Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-legacy18 SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:		Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-legacy18 SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:

	* internetofstuff/internetofstuff (for the "Internet of Stuff" VLAN; for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)		<!--* internetofstuff/internetofstuff (for the "Internet of Stuff" VLAN; for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)!-->
	* emf/emf or emfcamp/emfcamp or guest/guest (for regular user VLAN)		* emf/emf or emfcamp/emfcamp or guest/guest (for regular user VLAN)
			* outboundonly/outboundonly (Experimental. Allows only outbound traffic; giving users basic protection and a way to save battery usage)

	Please note the username AND password are case-sensitive.		Please note the username AND password are case-sensitive.
			<!--
	Projects that do not support WPA2 802.1X should use the emfcamp-insecure18 SSID. Based off the MAC address vendor, projects will dropped into the "Internet of Stuff"-VLAN automatically. If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):		Projects that do not support WPA2 802.1X should use the emfcamp-insecure18 SSID. Based off the MAC address vendor, projects will dropped into the "Internet of Stuff"-VLAN automatically. If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):

	* Texas Instruments		* Texas Instruments
	* Espressif Inc.		* Espressif Inc.!-->

	== Camping area and workshops ==		== Camping area and workshops ==

Davidc: ssid names

2018-08-11T21:23:47Z

ssid names

← Older revision		Revision as of 21:23, 11 August 2018
Line 60:		Line 60:
	Also see [[Network/802.1X client settings]] for a list of OS-specific client settings.		Also see [[Network/802.1X client settings]] for a list of OS-specific client settings.

	SSID: emfcamp or emfcamp-~~legacy~~		SSID: emfcamp or emfcamp-legacy18

	EAP-TTLS:		EAP-TTLS:
Line 79:		Line 79:

	=== Services / VLANs ===		=== Services / VLANs ===
	Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-~~legacy~~ SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:		Different services / VLANs are offered on the wireless network. On the emfcamp or emfcamp-legacy18 SSID you will be dropped into the correct VLAN using WPA2 802.1X. Use the following username/password combinations:

	* internetofstuff/internetofstuff (for the "Internet of Stuff" VLAN; for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)		* internetofstuff/internetofstuff (for the "Internet of Stuff" VLAN; for projects that should not be reachable from the internet, but only from the camp network. Does offer outbound internet connectivity, not inbound.)
Line 86:		Line 86:
	Please note the username AND password are case-sensitive.		Please note the username AND password are case-sensitive.

	Projects that do not support WPA2 802.1X should use the emfcamp-~~insecure~~ SSID. Based off the MAC address vendor, projects will dropped into the "Internet of Stuff"-VLAN automatically. If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):		Projects that do not support WPA2 802.1X should use the emfcamp-insecure18 SSID. Based off the MAC address vendor, projects will dropped into the "Internet of Stuff"-VLAN automatically. If you think your project should or should not be in this VLAN, get in contact with us. The following vendors will be dropped into this VLAN (for MAC address to vendor list see [http://standards-oui.ieee.org/oui.txt here]):

	* Texas Instruments		* Texas Instruments

Davidc at 21:23, 11 August 2018

2018-08-11T21:23:18Z

← Older revision		Revision as of 21:23, 11 August 2018
Line 24:		Line 24:
	== Uplink ==		== Uplink ==

	~~The camp site~~ will have ~~not yet announced~~.		EMF 2018 will have a 1 Gbps circuit out of the site, 1 Gbps transport from Sky For Business to London, and Internet connectivity from Sargasso Networks and LONAP.

	== Wireless ==		== Wireless ==

AK47 at 21:31, 10 August 2018

2018-08-10T21:31:21Z

← Older revision		Revision as of 21:31, 10 August 2018
Line 30:		Line 30:
	The whole field has been covered with many wireless access points to ensure the best possible coverage and to allow you to roam seamlessly without interruption. Naturally, there is additional coverage in popular areas such as the talk tents. The following wireless networks will be available:		The whole field has been covered with many wireless access points to ensure the best possible coverage and to allow you to roam seamlessly without interruption. Naturally, there is additional coverage in popular areas such as the talk tents. The following wireless networks will be available:

	; ~~emfcamp18~~		; emfcamp
	: This is 5GHz and should you should use this one in preference, if you can see it. The username and password are "emf". This is the most secure, WPA2-Enterprise.		: This is 5GHz and should you should use this one in preference, if you can see it. The username and password are "emf". This is the most secure, WPA2-Enterprise.
	; emfcamp-legacy18		; emfcamp-legacy18

AK47: /* Wireless */

2018-08-10T19:57:37Z

Wireless

← Older revision		Revision as of 19:57, 10 August 2018
Line 30:		Line 30:
	The whole field has been covered with many wireless access points to ensure the best possible coverage and to allow you to roam seamlessly without interruption. Naturally, there is additional coverage in popular areas such as the talk tents. The following wireless networks will be available:		The whole field has been covered with many wireless access points to ensure the best possible coverage and to allow you to roam seamlessly without interruption. Naturally, there is additional coverage in popular areas such as the talk tents. The following wireless networks will be available:

	; ~~emfcamp~~		; emfcamp18
	: This is 5GHz and should you should use this one in preference, if you can see it. The username and password are "emf". This is the most secure, WPA2-Enterprise.		: This is 5GHz and should you should use this one in preference, if you can see it. The username and password are "emf". This is the most secure, WPA2-Enterprise.
	; emfcamp-legacy18		; emfcamp-legacy18

AK47 at 19:46, 10 August 2018

2018-08-10T19:46:13Z

← Older revision		Revision as of 19:46, 10 August 2018
Line 72:		Line 72:
	Phase 2: MSCHAPv2 or EAP-MSCHAPv2 or PAP		Phase 2: MSCHAPv2 or EAP-MSCHAPv2 or PAP

	CN = radius.~~emf~~.~~camp~~		CN = radius.emfcamp.org
	CA = ~~StartCom Certification Authority~~		CA = DST Root CA X3
	~~SHA1~~ Fingerprint = ~~'''TBD'''~~		SHA256 Fingerprint=A2:5F:69:B2:79:4D:D0:F0:EB:BA:7C:60:08:25:E5:A3:B9:42:00:08:6E:EB:70:43:D0:B3:EC:BD:CB:1C:73:2C

	Make sure '''you check the certificate''' in order to know you are connecting to the correct network (you should check on both the CN and the CA). Check [[Network/RADIUS_certificate\|here]] for the complete certificate.		Make sure '''you check the certificate''' in order to know you are connecting to the correct network (you should check on both the CN and the CA). Check [[Network/RADIUS_certificate\|here]] for the complete certificate.

Davidc: uplink sponsor is no longer a secret

2018-08-01T23:14:28Z

uplink sponsor is no longer a secret

← Older revision		Revision as of 23:14, 1 August 2018
Line 213:		Line 213:

	== Supporters ==		== Supporters ==
	We'd like to extend our immense gratitude to the following people and organisations who have been instrumental in making the EMF network and uplink happen through their ~~donation~~ and sponsorship:		We'd like to extend our immense gratitude to the following people and organisations who have been instrumental in making the EMF network and uplink happen through their donations and sponsorship:

			* [https://ethernet.business.sky.com Sky For Business]
	* [https://www.flexoptix.net/en/ FlexOptix]		* [https://www.flexoptix.net/en/ FlexOptix]
	* [http://www.sargasso.co.uk/from/emfcamp Sargasso Networks]		* [http://www.sargasso.co.uk/from/emfcamp Sargasso Networks]
Line 221:		Line 222:
	* [https://www.lonap.net LONAP]		* [https://www.lonap.net LONAP]
	* [https://www.comtec.com Comtec Enterprises]		* [https://www.comtec.com Comtec Enterprises]

	~~Uplink sponsor and more sponsors will be announced soon!~~

	Special thanks to other companies that have gone above and beyond to help us:		Special thanks to other companies that have gone above and beyond to help us:

	* [http://www.envicoengineering.com/ Envico/Morgan Marine]		* [http://www.envicoengineering.com/ Envico/Morgan Marine]

Davidc: /* Rules */

2018-07-26T03:22:52Z

Rules

← Older revision		Revision as of 03:22, 26 July 2018
Line 16:		Line 16:
	* If you are operating anything else in the 2.4GHz spectrum, please clear the frequencies in advance with us.		* If you are operating anything else in the 2.4GHz spectrum, please clear the frequencies in advance with us.
	* Do not attempt to run a DHCP or RA server. You will be found and named and shamed!		* Do not attempt to run a DHCP or RA server. You will be found and named and shamed!
	* Cabling from your tent to the Datenklo must not cross any ~~roads~~ or fire lanes (this is to electrically protect our network hardware, as well as to reduce trip hazards).		* Cabling from your tent to the Datenklo must not cross any road, trackway or fire lanes (this is to electrically protect our network hardware, as well as to reduce trip hazards and vehicle snags).
	* If you are connecting a Nanode / Arduino Ethernet / other microcontroller to the network please make sure it is using a unique MAC address. Many of the code examples for such devices use an identical MAC address and this will cause problems - if you aren't sure contact us.		* If you are connecting a Nanode / Arduino Ethernet / other microcontroller to the network please make sure it is using a unique MAC address. Many of the code examples for such devices use an identical MAC address and this will cause problems - if you aren't sure contact us.
	* If you are connecting a switch, you need to contact the NOC if you are connecting more than 10 stations. You are only allowed one uplink from your switch to our network - do not attempt to connect multiple cables or to multiple DKs!		* If you are connecting a switch, you need to contact the NOC if you are connecting more than 10 stations. You are only allowed one uplink from your switch to our network - do not attempt to connect multiple cables or to multiple DKs!